Sony DSC-1024HD, Руководство по обслуживанию

Страница: 12 / 71

1-8
43
English
NTSC
NTSC
IN
OUT
PAL
PAL
31.5k
31.5k
37k
37k
48k
48k
64k
OTHERS
64k 1080i
SIGNAL FORMAT
OPEN SCAN CONVERTER DSC-1024HD
INPUT SELECT
1 2 3
ON/OFF
GEN-LOCK
When multiple pieces of Sony equipment are connected via the
CTRL S jack, you can operate a specific piece of equipment by
assigning the index number preset for each piece of equipment
on the converter, and then on the remote commander.
For presetting the index number on each piece of equipment,
refer to the Instruction Manual of the equipment.
The following explanation is an example of use of the RM-854
remote commander.
Assigning the index number on the converter
1 Press the MENU button once.
The MENU 1 screen appears.
2 Press the CENT ◊ / √ button to move the cursor (
z
) to
INDEX NO. and press the ENTER button.
The INDEX NO. screen appears.
3 Press the CENT
◊
/
√
button repeatedly to select the
index number (1 to 255) of the equipment you want to
control, and press the ENTER button.
4 To quit the menu, press the MENU button three times.
CTRL S IN
CTRL S OUT
CTRL S OUT
Remote signal
ID:3
ID:2
Remote
commander
CTRL S IN
Operating a specific unit with the remote
commander
Operating the equipment with the RM-854 remote
commander
1 Press the ID MODE ON button on the remote
commander.
The index numbers appear on all the pieces of equipment
including the converter.
2 Input the index number of the equipment you want to
operate using 0–9 buttons of the remote commander.
The input number appears right next to each equipment
own index number.
3 Press the ID MODE SET button.
The character on the selected equipment changes to cyan
while others change to red.
Now you can operate only a specified equipment (All
operations available in ID mode except POWER ON/OFF).
MENU
MENU 1
z
MEM LOAD
MEM SAVE
GEOM RESET
COLOR RESET
ALL RESET
INDEX NO.
LANGUAGE
USE: ENTER NEXT:MENU
ENTER
CENT
INDEX NO.
INDEX NO.:001
USE: ENTER CANCEL:MENU
ID MODE
ON
OFF
SET INDEX NO. : 001
...
INDEX NO. : 001 001
1 2 3
4 5 6
7 8 9
10
0
ID MODE
ON
OFF
SET
44
AC IN
CTRL S AUDIO IN OUT VIDEO OUT
IN
OUT
L
R
L
R
L
R
L
R
AUDIO 1 AUDIO 2 AUDIO 3
RGB YBR
SEP COMP
SYNC
VIDEO 3 IN
THROUGH
RGB YBR
75 OPEN
AUTO ON G
SYNC
VIDEO 2 IN VIDEO 1 IN
Y/C
IN OUT
COMP
IN OUT
THROUGH
NORMAL COMP
75 OPEN
RGB YBR
REF
4 Press the CENT ◊
/
√ button to move the cursor (
z
) to
ON, and press the ENTER button.
The gen-lock is activated for the signal output from this
unit and the GEN-LOCK indicator on the front panel
lights.
When the converter is turned on or the input mode is
changed, “GEN LOCK MODE” appears on the screen.
To deactivate the generator lock
Repeat steps 1 to 3 above, then set GEN LOCK to OFF in step
4. The GEN-LOCK indicator on the front panel turns off.
Notes
• If you select GEN LOCK on the MENU 2 screen with no
reference signal input, “NO REFERENCE” appears on the
screen.
• “WRONG REFERENCE” will appear when the reference
signal format does not correspond with the input signal
format.
• The RGB/component output is recommended for editing. If
you use the composite video output, a frame synchronizer
may be needed to adjust the phase to the reference signal.
For the SC/H (Subcarrier to Horizontal) adjustment, see
page 46.
The output NTSC or PAL signal can be synchronized using the
black burst signal input from a signal generator, etc. as a
reference signal (gen-lock).
This enables smooth editing without transition noise when
multiple video sources are used.
Activating the generator lock
1 Input the reference signal which corresponds with the
output signal format (NTSC or PAL) from the editor or
signal generator to the VIDEO 1 IN REF connector.
2 Press the MENU button twice.
The MENU 2 screen appears.
3 Press the CENT
◊
/
√
button to move the cursor (
z
) to
GEN LOCK, and press the ENTER button.
The GEN LOCK screen appears.
Connection example
REF
VIDEO IN
Personal
computer,
workstation,
etc.
Black burst signal
Editing switcher
Betacam SP video cassette
recorder (for playback)
Betacam SP video cassette
recorder (for recording)
Signal generator, etc. (to supply
black burst signal)
VIDEO 3 IN
VIDEO 1 IN
REF
VIDEO OUT
REF
VIDEO IN
Using the generator lock (gen-lock)
MENU 2
z
SETUP NTSC
GEN LOCK
SC/H ADJ
1080I 60/59.94
USE: ENTER EXIT:MENU
MENU
ENTER
CENT
GEN LOCK
z OFF
ON
USE: ENTER CANCEL:MENU
VIDEO2
GEN LOCK MODE
31.5k
z
NTSC