Sony DRC-BT60, Руководство по эксплуатации

Страница: 36 / 84

6
GB
When charging
Charging cannot be done.
 Check that the unit and the computer
are firmly connected by the USB cable.

Check that the computer is turned on.

Check that the computer is not in
standby, sleep or hibernation mode.
Charging time is too long.

Check that the unit and the computer
are directly connected, not via a USB
hub.
The unit cannot be recognised
by a computer.

The USB cable is not connected properly
to the USB port of the computer.
Connect the USB cable again.
 Check that the unit and the computer
are directly connected, not via a USB
hub.
 A problem may occur with the
connected USB port of the computer.
Connect to another USB port if it is
available.
 Try the USB connection procedure
again in cases other than those stated
above.
When listening to music
No sound
 Bluetooth device are turned on.
 A2DP Bluetooth connection is not made
between the unit and the Bluetooth
device. Make an A2DP Bluetooth
connection (page 17).
 Check that music is being played back
by the Bluetooth device.

Check that the volume of the unit is not
set too low.
 Turn up the volume on the connected
device if necessary.

Pair the unit and Bluetooth device again
(page 13).
Low sound level

Turn up the volume of the unit.

Turn up the volume on the connected
device if necessary.
Low sound quality

Switch the Bluetooth connection to
A2DP by operating the Bluetooth device
when HSP is set.
Sound skips frequently during
playback.

Reception condition of the unit may
have become unstable due to improper
matching of the bit-rate setting for the
music transmitted from the Bluetooth
device and the environment in which
the unit is used.
Set “Sound Quality” of (Settings) to
“Standard” (page 29).*
* The above operations may not reduce
the sound skip depending on the
usage environment. To reset to the
original setting, set “Sound Quality” of
(Settings) to “High Quality.”

If “Video Mode” is set to “On,” sound
skips may occur, depending on the
usage environment.
Set “Video Mode” of (Settings) to
“Off” (page 29).