Sony DRC-BT60, Руководство по эксплуатации

Страница: 22 / 84

GB
To receive a call
When an incoming call arrives, a ring
tone will be heard from the unit. The
incoming phone number also appears
on the display during Bluetooth
connection with HFP.
The ring tone differs in the following
ways, depending on your mobile
phone.
– ring tone set on the unit
– ring tone set on the mobile phone
– ring tone set on the mobile phone
only for Bluetooth connection
Tip
“Incoming call” appears on the display if the
incoming phone number is withheld due to a
number withhold request or if the Bluetooth
connection with HSP is made between the
unit and the Bluetooth device.
1
Press the button on the unit.
The call screen is displayed.
Call time *
1
*
2
Call device status *
1
Shows which device ( Bluetooth
mobile phone or unit) you use for
calling.
: appears during a call on
the Bluetooth mobile phone.
: appears during a call on
the unit.
*
1
The call time and call device status
are not displayed during Bluetooth
connection with HSP.
* 2 The call time is an approximation.
Note
If you received a call by pressing a button
on the Bluetooth mobile phone, some
Bluetooth mobile phones may have
handset use priority. In this case, set to
talk with the unit by pressing the

button (only during Bluetooth connection
with HFP), or by pressing and holding
the button for about 2 seconds, or by
operating the Bluetooth mobile phone.
For details, refer to the manual supplied
with your Bluetooth mobile phone.
To adjust the volume
Press the VOL+/− button while calling
to adjust the volume.
Tips
 You cannot adjust the volume when not
communicating.

Volume for calling, listening to music and
FM radio can be adjusted independently.
Even if you change the volume while
playing back the music or listening to FM
radio, the volume of a call does not change.
To terminate a call
You can end a call by pressing the
button on the unit.
To stop use
1
Terminate Bluetooth connection
by the Bluetooth mobile phone.
Press and hold the POWER
button for about seconds to
turn off the power.
“Power Off” appears on the display
as the indicator (blue) lights up,
and then the unit turns off.