Sony DRC-BT60, Руководство по эксплуатации

Страница: 30 / 84

0
GB
Remote Command
You can set this function when
operating the Bluetooth device
corresponding to AVRCP. You can
change command types to the
Bluetooth device by pressing and
holding the  /  button during
playback. You may be able to fast-
forward and fast-rewind by changing
this setting, depending on the
Bluetooth device.
Mode 1 Command Mode 1
Mode 2 Command Mode 2
Unit Info
You can check Bluetooth information
about the unit.
Device Name The model name of the unit
is displayed.
Device
Address
The BD address (unique
Bluetooth device number) is
displayed.
Profile Connectable profiles (HFP,
HSP, A2DP or AVRCP) to
the Bluetooth devices is
displayed.
FM Tuner
You can perform FM tuner setting.
Select items by pressing the

/

button (select) and

button
(confirm) repeatedly. The default
setting is underlined.
Dx/Local/Mono
Set this function when FM reception is
poor.
Dx Normal setting.
Local Select this if radio signals are
so strong that FM reception is
distorted.
Mono Select this if radio signals are
so poor that FM reception is
unstable. (Noise is reduced
allowing you to listen to FM
radio more clearly.)
Scan Sens
You can set the receiver sensitivity of
manual tuning (page 26).
High Normal setting.
Low Select this if the reception is
so strong that unnecessary
broadcast stations are
received.
Brightness
You can set the display brightness level
from 1(dark) to 5 (bright). Press the

/

button to select the
brightness level, and then pressing the
 button to confirm. The default
setting is Level 3.
Note
If you use the unit with a bright screen, usage
hours decrease.
Initialize
You can reset the unit to its default
(such as pairing information, preset,
etc.) and delete all information. You
can initialize by pressing the

/

button to select “OK,” and
then pressing the

button to
confirm.
Note
You cannot set this function in the following
situations.
–
During Bluetooth connection.
– While FM radio is activated.