Sony DNW-75, Руководство по эксплуатации

Страница: 95 / 120

Chapter 7
Menu System
Chapter 7 Menu System
7-15
Menu items in the 500s, relating to tape protection
Menu items in the 600s, relating to the time code generator
Item number Item name Settings
501
STILL TIMER
Select the time delay from the tape transport stopping (either the “STOP mode”
or the still playback mode in search mode) until the unit automatically switches to
the tape protection mode, in order to protect the video heads and the tape.
0.5S ... 8M ... 30M: Set the value in the range 0.5 seconds to 30 minutes.
502 TAPE PROTECTION
MODE FROM SEARCH Select the operation of the protection mode to protect the video heads and tape
when in the still playback mode in search mode (jog/shuttle).
STEP : Step forward at 1/30 normal speed every 2 seconds.
STDBY: Switch to “Standby OFF mode” (the unit not on standby).
T REL: Switch to tension release mode (the tape tension slackened).
503 TAPE PROTECTION
MODE FROM STOP Select the operation of the protection mode to protect the video heads and tape
when stopped (the “STOP mode”).
STDBY : Switch to “Standby OFF mode” (the unit not on standby).
T REL: Switch to tension release mode (the tape tension slackened).
504 DRUM ROTATION IN
STANDBY OFF Select whether the drum rotates in “Standby OFF mode”.
OFF : Drum does not rotate.
ON: Drum rotates.
505
STILL TENSION Select the tape tension state in the still playback mode.
NORM : Normal tape tension is maintained during still playback mode, ready for
playback.
LOOSE: Reduce the tape tension further from the NORM setting. (Select
“LOOSE” when the unit is on standby for a long period of still playback, for
example, in a library management system (LMS).)
Note
When LOOSE is selected, playback cannot be guaranteed.
Item number
Item name Settings
601 VITC POSITION SEL-1 In 525 mode
Select a line to insert the VITC in.
12H ... 16H ... 20H: Select any line from 12 to 20.
Note
You can insert the VITC signal in two places. To insert it in two places, set both
items 601 and 602.
In 625 mode
Select a line to insert the VITC in.
9H ... 19H ... 22H: Select any line from 9 to 22.
Note
You can insert the VITC signal in two places. To insert it in two places, set both
items 601 and 602.
(Continued)