Sony DNW-30, Руководство по эксплуатации

Страница: 41 / 58

Chapter 5
Menu System
Chapter 5 Menu System
5-9
Menu items in the 100s, relating to the control panels (continued)
Menu items in the 200s, relating to the remote control interface
Item number Item name
Settings
118 KEY INHIBIT SWITCH
EFFECTIVE AREA Select which switches and buttons can be operated when the KEY INHIBIT
switch on the subsidiary control panel is set to ON. The following sub-items
control different sets of switches and buttons independently.
Sub-item
REMOTE
SELECT Select whether the REMOTE/LOCAL switch in the upper control panel is enabled.
DIS : Disabled.
ENA: Enabled.
2 MONITOR
SELECT
1
Select whether the AUDIO MONITOR SELECT buttons in the upper control panel
are enabled.
DIS : Disabled.
ENA: Enabled.
3 CONTROL
PANEL Select which switch and button operations can be carried out from the control
panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons are disabled.
EDIT: All switches and buttons for editing operations are disabled.
ENA: All switches and buttons are enabled.
119 VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL Select the playback speed range when carrying out playback in variable mode
from the control panel of this unit.
OFF : –1 to +1 times normal speed.
ON: 0 to +1 times normal speed.
120 CTL LOCK IN VAR/SHTL Select whether the tape transport should be phase-locked to the CTL signal
during playback in variable or shuttle mode.
OFF : Not phase-locked.
ON: Phase-locked at the following speeds: –1, –0.5, 0.5, and 1.0 times normal.
123 TAPE INDEX SELECT Select the “UB marks” to which INDEX functions apply.
REC: Select REC START MARK.
SHOT1: Select SHOT MARK 1.
SHOT2: Select SHOT MARK 2.
ALL: Select REC START MARK, SHOT MARK 1, and SHOT MARK 2.
When the tape is cued up to a UB mark, the type of UB mark (REC,SHOT 1, or
SHOT 2) is displayed in the time data display area.
The UB marks are recorded by a Betacam SX camcorder. For more information
about the UB marks, refer to the camcorder operation manual.
201 PARA RUN Select whether or not to use synchronized operation for two or more VTRs.
DIS : No synchronized operation.
ENA : Use synchronized operation.
Item number Item name Settings