Chapter 5
Menu System
5-2
Chapter 5
Menu System
Item number
Item name
Settings
006
LOCAL FUNCTION
ENABLE
Determines which buttons on the control panel are enabled when this unit is
controlled from external equipment.
DIS: All buttons and switches are disabled.
ST&EJ : Only the STOP button and EJECT button are enabled.
ENA: All buttons and switches except the RECORDER button and PLAYER
button are enabled.
007
TAPE TIMER DISPLAY
Determines whether to display the CTL count in 12-hour mode or 24-hour mode.
+ –12H: 12-hour mode
24H: 24-hour mode
009
a)
CHARACTER TYPE
Determines the type of characters such as time code output from the
COMPOSITE VIDEO OUTPUT 3 (SUPER) connector for superimposed display
on the monitor.
WHITE: White letters on a black background.
BLACK: Black letters on a white background.
W/OUT: White outline letters.
B/OUT: Black outline letters.
011
a)
CHARACTER V-SIZE
Determines the vertical size of characters such as time code output from the
COMPOSITE VIDEO OUTPUT 3 (SUPER) connector for superimposed display
on the monitor.
×
1: Standard size
×
2: 2 times standard size
×
3: 3 times standard size
×
4: 4 times standard size
013
525/625 SYSTEM
SELECT
Before using this menu
item, consult the person
responsible for the
installation.
Specify whether to enable switching between the 525 (NTSC) and 625 (PAL)
systems.
OFF: Do not enable system switching.
ON: Enable system switching.
Setting this item to ON and switching the system enables the unit to operate in
the system switched to.
Note
Switching the system resets all menu items to their factory default settings.
For information on how to switch the system, see the section “Switching between
525/625 line systems (menu item 013)” (page 5-5).
B01
RECALL BANK 1
Set to ON to recall menu settings from menu bank 1.
B02
RECALL BANK 2
Set to ON to recall menu settings from menu bank 2.
B03
RECALL BANK 3
Set to ON to recall menu settings from menu bank 3.
B04
RECALL BANK 4
Set to ON to recall menu settings from menu bank 4.
B11
SAVE BANK 1
Set to ON to save current menu settings to menu bank 1.
B12
SAVE BANK 2
Set to ON to save current menu settings to menu bank 2.
B13
SAVE BANK 3
Set to ON to save current menu settings to menu bank 3.
B14
SAVE BANK 4
Set to ON to save current menu settings to menu bank 4.
B20
RESET SETUP
Set to ON to reset current active settings to factory default values.
5-2 Basic Menu
005
DISPLAY INFORMATION
SELECT
Determines the kind of character information to be output from the COMPOSITE
VIDEO OUTPUT 3 (SUPER) connector when the CHARACTER switch on the
subsidiary control panel is set to ON.
T&STA : Time data display information and the unit’s status.
T&UB: Time data display information and the user’s bits.
T&CTL: Time data display information and CTL.
T&T: Time data display information and time code (LTC or VITC).
TIME: Time code (LTC or VITC) only.
If there is a overlap between the setting of this item and the setting of the control
panel, it is automatically avoided. For example, if CTL is selected on the control
panel and this menu item setting is T&CTL, then CTL and LTC are output.
a) When setting items 002, 003, 009, and 011, watch the
monitor screen, and adjust to the required state.
