Chapter 2
Location and Function of Parts
2-12
Chapter 2
Location and Function of Parts
75
Ω
ON
OFF
SDI
DIGITAL OUTPUT
1
2
AUDIO OUTPUT
TIME CODE
MONITOR OUTPUT
VIDEO INPUT
VIDEO OUTPUT
REF.VIDEO
COMPONENT
(OPTION)
Y
R-Y
B-Y
1
2
3
COMPOSITE
(SUPER)
REMOTE(9P)
RS-232C
VIDEO CONTROL
AC IN
BREAKER
OUT
CH1
CH2
CH3
CH4
R
L
2-2 Connector Panel
Cooling fan
4
REF.VIDEO INPUT connector and 75
Ω
termination
switch
2
TIME CODE OUT connector
1
AUDIO OUTPUT CH1 to CH4 connectors
3
SDI DIGITAL OUTPUT
connectors
5
COMPOSITE VIDEO OUTPUT connectors
6
COMPONENT VIDEO OUTPUT connectors
Cooling fan
7
Power supply
8
External device connectors
9
MONITOR OUTPUT connectors
1
AUDIO OUTPUT CH1 to CH4 connectors
(XLR 3-pin, male)
These output analog audio signals for channels 1 to 4.
2
TIME CODE OUT connector (XLR 3-pin, male)
During playback, this outputs the playback time code.
3
SDI (Serial Digital Interface) DIGITAL
OUTPUT connectors (BNC type)
These output D1 format digital video/audio signals.
4
REF. (reference) VIDEO INPUT connectors
(BNC type) and 75
Ω
termination switch
Input a reference video signal. Input a video signal
with chroma burst (VBS) or a monochrome video
signal (VS). When using the loop-through connection
set the switch to the OFF position, and otherwise to the
ON position.
5
COMPOSITE VIDEO OUTPUT connectors
(BNC type)
These output analog composite video signals.
When the CHARACTER switch on the subsidiary
control panel is set to ON, the output from connector 3
(SUPER) has superimposed text information such as
time code, menu settings, and alarm messages.
6
COMPONENT VIDEO OUTPUT connectors
(BNC type)
These output analog component video signals (Y/R–Y/
B–Y).
