11-2
Function Menu Item List
Chapter 11
Function Menu
11-6
Chapter 11
Function Menu
Page 3
Item
F1 (SYNC)
F2 (SC)
F3 (VIN LV)
F4 (EMPHSS)
F5 (T INFO)
Setting
Sets the output signal sync phase.
Setting method
With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal
sync phase across the range ±15 µs relative to this unit’s input reference signal.
Adjust this item when you want to adjust the output signal sync phase precisely to match a reference
signal, or when connecting this unit and other VTRs to a device such as a switcher to perform operations
such as special effects editing.
Sets the output signal subcarrier phase.
Setting method
With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal
subcarrier phase across the range ±200 ns relative to this unit’s input reference signal.
Adjust this item when you are using composite signals in editing and want to adjust the output signal
subcarrier phase precisely to match a reference signal. Even when this value is adjusted, the output SCH
(subcarrier to sync) phase is maintained.
Sets the level of composite video signals input to the COMPOSITE VIDEO INPUT connectors.
AGC: Adjusts the level automatically.
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust
the level of composite video signals input to the COMPOSITE VIDEO INPUT connectors.
Specifies whether to add audio emphasis to analog audio input signals and Betacam/Betacam SP format
playback audio signals.
ON: Add audio emphasis.
OFF: Do not add audio emphasis.
Selects the type of time data to display in time data display area 2.
TOTAL: Display total time.
REMAIN: Display remaining time.
