74
Your camcorder automatically searches for a desired scene having the tape counter
value of “0:00:00”. Use the Remote Commander for this operation.
The POWER switch should be set to
.
(
1
)
During playback, press ZERO SET MEMORY on the Remote Commander at
the point you want to locate later. The tape counter shows “0:00:00”, then starts
counting. If the indicators do not appear, press DISPLAY. The ZERO SET
MEMORY indicator flashes.
(
2
)
Press
x
when you want to stop playback.
(
3
)
Press
m
to rewind the tape to the tape counter’s zero point. The tape stops
automatically when the tape counter reaches approximately zero.
(
4
)
Press
N
. Playback starts from the counter’s zero point.
Notes
• When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
function will be canceled.
• There may be a discrepancy of several seconds between the time code and the tape
counter.
• The ZERO SET MEMORY indicator disappears when you press FN.
If the tape has a blank portion between recorded portions
The zero set memory function may not work correctly.
Quickly locating a scene
– Zero set memory
ZERO SET MEMORY
N
DISPLAY
m
x
Содержание DCR-TRV70 - Digital Handycam Camcorder
Страница 219: ......
