Sony DAV-S888, Руководство по эксплуатации

Страница: 28 / 88

28
GB
x LEVEL
You can vary the level of each speaker as follows. The default settings are underlined.
• C. LEVEL (0 dB) (center speaker level)
Adjust the level of the center speaker (You can adjust from –6 dB to +6 dB in 1 dB steps.).
• R. LEVEL (0 dB) (rear speakers level)
Adjust the level of the rear speakers (You can adjust from –6 dB to +6 dB in 1 dB steps.).
• S. W. LEV. (0 dB) (subwoofer level)
Adjust the level of the subwoofer (You can adjust from –6 dB to +6 dB in 1 dB steps.).
Notes
• When you select an item, the sound cuts off for a moment.
• Depending on the settings of other speakers, the subwoofer may output excessive sound.
To adjust the volume of all the speakers at one time
Use the VOLUME control.
Other AMP MENU settings
You can control the brightness of the front panel display, clear the preset stations and the station
names, and set the speaker parameters back to the default setting. Press AMP MENU repeatedly
to display
9
CUSTOMIZE. Use
X
/
x
to select the following items.
x DIMMER
You can change the brightness of the front panel display by two steps.
x MEMO. CLR.
• N (No): Skip back to previous menu.
• Y (Yes): If you select Y by pressing ENTER, “Really? N” and “Really? Y” appears.
If you select “Really? Y,” by pressing ENTER, “ALL CLEAR!” is displayed and all settings
such as preset stations and station names will be cleared, and speaker parameters will be reset
to their default settings.
This system incorporates with Dolby Pro Logic II which has movie mode and music mode, and
the system can reproduce the 2 channel sound in 5.1 channel through Dolby Pro Logic II.
When the Sound Field is set to “NORMAL SURROUND,” you can select the type of decoding
for 2 channel source. Press AMP MENU repeatedly to display
9 2CH MODE. Use X / x to select
the following items.
x 2CH MODE
• PLII MOVIE (Pro Logic II Movie): Performs the Pro Logic II movie mode decoding. This
setting is ideal for the movies encoded in Dolby Surround. Besides, this mode can reproduce
the sound in 5.1 channel when watching the videos of old movies or in the dubbed language.
• PLII MUSIC (Pro Logic II Music): Performs the Pro Logic II music mode decoding. This
setting is ideal for the normal stereo sources, such as CDs.
• PRO LOGIC: Performs the Pro Logic decoding. The source recorded in 2 channel is decoded
into 4 channels.
Note
Dolby Pro Logic II does not function for DTS or MPEG format signals or Super Audio CD.