Sony DAV-F200, Руководство по эксплуатации

Страница: 20 / 219

20
GB
Gettin
g
Star
ted
Note
• When connecting the jack, insert the plug into the jack as far as it will go.
• When connecting the digital optical cord, insert the connector until it clicks (
B
).
• During the “DMPORT” function, video signal is not output from the HDMI OUT and VIDEO OUT
(COMPONENT) jacks. Select connection method
A
to obtain pictures since the video signal is output from the
VIDEO OUT (VIDEO) jack.
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. (COAXIAL
has priority over OPTICAL.) If the digital signal ceases, the analog signal will be processed after 2 seconds.
Tip
• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV (AUDIO
IN) jack (
A
) or TV (DIGITAL IN OPTICAL) jack (
B
) instead of the TV.
To change the color system (PAL or NTSC) (Southeast Asian models
only)
Depending on the TV to be connected, you may be required to select either PAL or NTSC for the color
system.
The initial setting of the system is NTSC.
1
Turn off the system by pressing \ / 1 .
2
Turn on the system by pressing \ / 1 while pressing VOL – on the front panel.
Each time you perform this operation, the color system toggles between PAL and NTSC.
“NTSC” lights up in the front panel display when the color system is set to NTSC.
You can enjoy the connected component using the speakers of the system.
• Digital satellite receiver, etc.:
A
• DIGITAL MEDIA PORT adapter:
B
• AV receiver, etc.: C (only when DVD function is selected)
4
Connecting the other components