65
Advanced still image shooting
First shot (Adjusted in the + direction)
Second shot
(Proper exposure set by the camera)
Third shot (Adjusted in the – direction)
Set the mode dial to P, S, A, M
or SCN.
Press MENU.
The menu appears.
Select [Mode] (REC Mode)
with
/
, then [Exp Brktg] with
/
.
Select [BRK] (Bracket Step)
with
/
, then select the
desired bracket step value
/
.
±1.0EV:
Shifts the exposure value by
plus or minus 1.0EV.
±0.7EV:
Shifts the exposure value by
plus or minus 0.7EV.
±0.3EV:
Shifts the exposure value by
plus or minus 0.3EV.
Shoot the image.
To return to normal mode
Select [Normal] in step
.
•
You may not be able to use the Exposure
Bracket mode depending on the Scene
Selection mode (page 41).
•
You cannot use the fl ash in this mode.
•
The focus and white balance are adjusted for
the fi rst image, and these settings are also used
for the other images.
•
When the exposure is manually adjusted
(page 61), the exposure is shifted based on the
adjusted brightness.
•
The recording interval is approximately 0.3
second.
•
If the subject is too bright or too dark, you may
be unable to shoot properly with the selected
bracket step value.
• You cannot select certain shutter speeds*.
* When [ISO] is [800]:
Shutter speeds of 1/25 second or slower
When [ISO] is other than [800]:
Shutter speeds of 1/6 second or slower
Selecting the ISO
sensitivity
— ISO
You can change the camera’s sensitivity
to light. When you select a high-number
setting, you can shoot in a dark place.
Normally, the ISO sensitivity is set to
[Auto]. When set to [Auto], the ISO
sensitivity is automatically increased in a
dark place.
MENU Mode
dial
Control button
Set the mode dial to P, S, A or
M.
Press MENU.
The menu appears.
