15
Getting started
Number of images and battery
life that can be recorded/
viewed
The tables show the approximate number
of images and the battery life that can be
recorded/viewed when you shoot images
in normal mode with a fully charged
battery pack (supplied) at a temperature
of 25°C (77°F). The numbers of images
that can be recorded or viewed take into
account changing the recording medium
as necessary. Note that the actual numbers
may be less than indicated depending on
the conditions of use.
• The battery capacity decreases as the number
of uses increases and over time (page 147).
Shooting still images
Under the average conditions
1)
Recording
medium
NP-FR1 (supplied)
LCD
screen
No. of
images
Battery
life (min.)
“Memory
Stick”
On
Approx.
300
Approx.
150
Off
Approx.
400
Approx.
200
CF card
On
Approx.
300
Approx.
150
Off
Approx.
400
Approx.
200
1)
Shooting in the following situations:
–
(P.Quality) is set to [Fine]
– Shooting one time every 30 seconds
– The zoom is switched alternately between
the W and T ends
– The fl ash strobes once every two times
– The power turns on and off once every ten
times
– [AF Mode] is set to [Single] in the SET UP
settings
The measurement method is based on CIPA
standard. (CIPA: Camera & Imaging Products
Association)
Viewing still images
2)
Recording
medium
NP-FR1 (supplied)
No. of
images
Battery life
(min.)
“Memory Stick” Approx. 6800 Approx. 340
CF card
Approx. 6800 Approx. 340
2)
Viewing single images in order at about three
second intervals
Shooting movies
3)
Recording
medium
NP-FR1 (supplied)
LCD screen
On
LCD screen
Off
“Memory
Stick”
Approx. 120
min.
Approx. 170
min.
CF card
Approx. 120
min.
Approx. 170
min.
3)
Shooting movies continuously with the image
size [160]
• The number of images and the battery life that
can be recorded/viewed are decreased under
the following conditions:
– The surrounding temperature is low
– The fl ash is used
– The camera has been turned on and off many
times
– The zoom is used frequently
– The NightFraming or NightShot function is
activated
– [LCD Backlight] is set to [Bright] in the SET
UP settings
– [AF Mode] is set to [Monitor] or [Cont] in
the SET UP settings
– The battery power is low
• The battery life and the number of images
recordable or viewable does not depend on the
image size setting.