DSC-HX20/HX20V/HX30/HX30V_L2
1-17
q;
Straight Tube (A) Assy
Groove (wide)
Align the White Part with the Groove (wide) as shown in the figure and install the 1st Lens Assy to the Straight Tube (A) Assy
while inserting the three Guide keys into the three Guide grooves.
qa
qs
Align the Bayonet (wide) with the Groove (wide) and install the 2nd-4th Lens Block to the Straight Tube (A) Assy.
Bayonet (wide)
While holding the Cam Tube (B) Assy, fully turn the Straight Tube (A) Assy clockwise (approx. 120 degrees) to set it to the retracted state.
Straight Tube (A) Assy
Cam Tube (B) Assy
2nd-4th Lens Block
1st Lens Assy
Straight Tube (A) Assy
Guide keys
White Part
Guide grooves
Groove (wide)
Guide groove
qd
qf
Align the Projection (large) with the Gear as shown in the figure and install the Feed-Through Cam Tube to the Rotary Tube Assy.
Turn the Feed-Through Cam Tube in the arrow direction to set the Projection (large) and the Gear to the positions shown in the figure.
qg
qh
Align the semicircular edge with the Naruto Gear mounting hole as shown in the figure and install the Feed-Through Cam Tube and
the Rotary Tube Assy to the Stationary Tube.
Engage the seven Projections of the Feed-Through Cam Tube with the seven Grooves of the Stationary Tube.
Rotary Tube Assy
Feed-Through Cam Tube
Feed-Through
Cam Tube
Feed-Through Cam Tube
Gear
Gear
Gear
Projection
(large)
Projection (large)
Projection
(large)
Feed-Through
Cam Tube
Eyepiece side
Eyepiece side
Projection
(large)
Naruto Gear
mounting hole
Feed-Through Cam Tube,
Rotary Tube Assy
Stationary Tube
Stationary Tube
Semicircular edge