Sony CMT-Z100DIR Скачать руководство пользователя страница 42

Страница: 42 / 60

CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)



Files that are encrypted or protected by

passwords, etc. cannot be played back.

* This system supports FAT16 and FAT32, but

some USB storage devices may not support

all of these FAT. For details, see the operation

manual of each USB storage device or

contact the manufacturer.

Tuner

Severe hum or noise, or stations

cannot be received. (“TUNED” or

“STEREO” flashes in the display.)



Connect the antenna properly.



Find a location and an orientation that

provide good reception, and then set

up the antenna again.



Keep the antennas away from the

power cord and the USB cable to avoid

picking up noise.



Turn off nearby electrical equipment.

“TUNED” does not appear in the

display (DAB only).



Check all antenna connections, then

perform the DAB Automatic Scan

procedure (see “Reception of DAB

radio station (CMT-Z100DiR only)”

(page 14)).



The current DAB service may not be

available. Press +/



(or TUNE +/



the unit) to select a different service.



If you have moved to another area,

some services/frequencies may have

changed and you may not be able to

tune into your usual broadcast.

Perform the DAB Automatic Scan

procedure to re-register the contents of

broadcasts. (Performing this procedure

clears all previously stored presets.)

To change the AM tuning interval

(Latin American model only)

The AM tuning interval is factory-preset

to 9 kHz (or 10 kHz for some areas).

Use buttons on the unit to change the

AM tuning interval.

Tune in any AM station, and then

turn off the system.

While holding down FU,

press



All the AM preset stations are erased.

To reset the interval to the factory

preset, repeat the procedure.

To reset the system to factory settings

If the system still does not operate

properly, reset the system to factory

settings.

Use buttons on the unit to reset the unit

to its factory default settings.

Disconnect and reconnect the power

cord, and then turn on the system.

Press DSGX and





for about

3 seconds.

All user-configured settings, such as

preset radio stations, timer, and the

clock, are deleted.

Содержание CMT-Z100DIR





























































Результаты поиска

Содержание CMT-Z100DIR

Отзывы:

Похожие инструкции для CMT-Z100DIR

Бренды по названию

Популярные бренды

Sony CMT-Z100DIR, Руководство по эксплуатации

Результаты поиска

Содержание CMT-Z100DIR

Отзывы:

Похожие инструкции для CMT-Z100DIR

Бренды по названию

Популярные бренды