![background image](http://html.mh-extra.com/html/sony/cmt-z100dir/cmt-z100dir_operating-instructions-manual_420475019.webp)
CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)
1
GB
Oper
ations
3
Press ENTER to perform scanning.
Scanning begins. The scanning
progress is indicated by advancing
asterisks (
). Depending on the
DAB services available in your area,
scanning may take a few minutes.
When scanning is complete, a list of
available services is created.
Notes
If your country or region does not support
DAB broadcast, “No Service” appears.
This procedure clears all previously stored
presets.
Before unplugging the DAB antenna, make
sure the system is turned off to preserve your
own DAB settings.
Presetting a radio station
Use buttons on the remote to preset
stations.
1
Tune in the desired station.
2
Press TUNER MEMORY to select
the tuner memory mode.
Preset number
3
Press +/
repeatedly to select
the desired preset number.
If another station is already assigned
to the selected preset number, the
station is replaced by the new station.
4
Press ENTER to store the station.
5
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 DAB, 20 FM
and 10 AM stations. The preset
stations are retained for about half a
day even if you disconnect the power
cord or if a power failure occurs.
Continued