CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)
GB
5
Start transferring.
Press ENTER.
Transferring starts.
When using CD SYNC
When the transfer is completed,
access to the USB device and the CD
player stop automatically.
When using REC1
When the transfer is completed, access
to the USB device stops automatically
and the CD player continues playback.
While transferring music, no sound
is output and the display changes
cyclically as follows:
“Don’t Remove”
“
%”
(percentage transferred)
“Don’t
Remove”
“
/
” (number of
source folders or files transferred /
total number of folders or files)
To select the memory on the USB
device
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select
which memory to read to and then start
transferring.
1
Connect the USB device to the
(USB) port.
2
Select the USB function.
Press FU/
repeatedly.
3
Press TOOL MENU in stop mode.
The total number of folders appears.
If an audio file or a folder is selected,
“Erase?” appears instead. Press TOOL
MENU repeatedly to select “Mem
Sel?”.
4
Press ENTER.
The memory number (“Memory 1?”
through “Memory 5?”) appears.
The displayed number varies
depending on the connected USB
device.
5
Press
/
repeatedly to select the
memory.
Proceed to step 6 if only one memory
can be selected.
To cancel this operation, press
.
6
Press ENTER.
7
Start transferring by following steps
2 through 6 of “Transferring music
from a disc to a USB device.”
To stop transferring
Press
.
