Sony CMT-M700DVD, Руководство по эксплуатации, Страница: 64 / 96

64
GB
CMT-M700DVD 4-240-065-11(1) GB
Recording your favorite
CD/MD tracks on a tape
— CD/MD-TAPE Synchro Recording
You can record a whole CD or MD on a tape.
You can use TYPE I (normal) tape.
1
Load a recordable tape.
2
Load a CD or MD you want to record.
3
Press SYNCHRO MODE repeatedly until
“CD
t TAPE SYNC?” or “MD t TAPE
SYNC?” appears.
4
Press ENTER/START.
“Press START” flashes.
The tape deck stands by for recording and
the CD player or MD deck pauses for play.
Press TAPE
nN
again to record on the
bottom side.
5
Press DIRECTION repeatedly until
g
appears to record on one side or h (or
j
) to record on both sides.
If you select both sides recording and the
tape reaches the end of the front side part-
way through a track, the entire track is
recorded again from the beginning of the
reverse side. If you start from the reverse
side, recording stops at the end of the
reverse side.
6
Press ENTER/START while “Press
START” flashes.
Recording starts.
When the recording is completed, the CD
player or MD deck, and the tape deck stop
automatically.
To stop recording
Press
x
(or TAPE
x
on the remote).
Recording on an MD and a tape at
the same time
Insert a recordable MD, then select “DUAL
SYNC?” in step 3.
Even if the MD or the tape ends part-way
through the recording, the other continues
recording.
To record only your favorite CD or
MD tracks
You can record only your favorite CD or MD
tracks using the Program Play. Between steps 2
and 3, perform steps 1 to 5 of “Creating your
own program” (page 14) or “Programming MD
tracks” (page 35).
Note
Depending on the VIDEO CD, you cannot use the CD
Synchro Recording. In this case, record from the
VIDEO CD manually.
Tape – Recording