Sony CMT-M700DVD, Руководство по эксплуатации, Страница: 52 / 96

52
GB
CMT-M700DVD 4-240-065-11(1) GB
Erasing recordings
— Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily.
You can restore the erased contents using the
Undo function immediately after the erasing
(page 57). However, you cannot restore the
erased contents after performing other editings.
Before erasing, make sure if it is all right to
erase the content.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
• Erasing a portion of a track (A-B Erase
Function)
Erasing a single track
— Track Erase Function
When you erase a track, the total number of
tracks on the MD decreases by one and all the
tracks following the erased one are
renumbered.
Example: Erasing track 2.
1 2 3
1 2 3
4
A C D
A C D
B
Erase track 2
Track number
Original
tracks
After
ERASE
As the track numbers are renummbered as
above, it is recommended to erase from the
latter tracks when erasing several tracks, so as
not to change the track numberings of unerased
tracks.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO on the remote to
display “Edit Menu”.
3
Press MENU + or – on the remote
repeatedly until “Tr Erase?” appears,
then press ENTER/YES on the remote.
The playback of the selected track starts.
4
Press MD . or > on the remote
repeatedly until the desired track
number appears.
5
Press ENTER/YES on the remote.
“Complete!” appears. The track selected in
step 4 is erased and the playback of the
following track starts. When you erase the
last track, the playback of the previous track
starts.
Note
If you erase all the tracks within a group, the group
itself is also erased.
TOC
L-SYNC