![background image](http://html.mh-extra.com/html/sony/cmt-cpz1/cmt-cpz1_operating-instructions-manual_420296026.webp)
26
GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A
ANALOG IN jack
Use audio cord (not supplied) to connect an
optional analog component (MiniDisc player/
recorder or Portable Audio player, etc.) to this
jack. You can then record or listen to the sound
from the component through this system.
B
CD DIGITAL OUT jack
Use a digital optical cord (square, not supplied)
to connect an amplifier, MiniDisc player/
recorder or DAT deck with a digital optical input
jack. Sound is then output when the system
function is set to CD. If the jack is covered with
a cap, remove it before use.
Notes
• There is no digital audio output from this jack during
playback of ATRAC3plus/MP3 tracks.
• You cannot make a digital recording of a copy
guarded disc using a digital component connected to
this system. Also, playback may not be possible
depending on the connected component.
• Before connecting or disconnecting the audio cord
(not supplied), press VOLUME – repeatedly (or turn
the VOLUME control on the unit counterclockwise)
to turn down the volume.
Optional Components
Hooking up optional components
Optional analog component
From the audio output jacks of
an optional analog component
To the digital input jack of an
optional digital component
Optional digital component
*
* &
GI