Sony CineAlta HDCAM HDW-F900R, Руководство по обслуживанию, Страница: 188 / 546

4-72
HDW-F900R/V1 (E)
MANUAL RPN Display (Adjusting the DC value of the RP-131 board)
Item Setting Function
OUTPUT SELECT Y/R/G/B/RGB * Selects the video signal that is output from the TEST OUT and
the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when VBS is selected
in the SD REAR BNC OUT of the OUTPUT SEL display (of
the OPERATION menu) and SD is selected in the TEST OUT
SELECT.) The output signal returns to the Y-signal without fail
at power-on.
RPN CURSOR OFF/ON Turns ON/OFF the cursor for RPN.
TEST OUT MENU OFF/ON Turns ON/OFF the function to mix the menu display in the
output signal of the TEST OUT terminal.
CURSOR H POS. _ 480 to 479 Sets the position of the RPN cursor. (Horizontal direction)
CURSOR V POS. _ 270 to 269 Sets the position of the RPN cursor. (Vertical direction)
CURSOR JUMP PREV/CURR/NEXT Has the cursor jump to the place where the RPN data is
registered.
PREV : Jumps to the RPN data before the current position.
CURR : Current display
NEXT : Jumps to the RPN data after the current position.
RECORD RPN Press the rotary encoder Registers the RPN data of the current cursor position.
to execute this menu item.
DELETE RPN Press the rotary encoder Deletes the RPN data of the current cursor position.
to execute this menu item.
FIELD/FRAME FIELD/FRAME Sets the CCD read-out system.
FIELD :
Field reading-out (normal readout)
FRAME : Frame reading-out
(This position is used to obtain the higher
vertical resolution power.)
Reference : When the super EVS (high vertical resolution)
mode is set to ON, FIELD is selected forcibly.
* : RGB can be selected only when the Camcorder is used in the service mode.
? 07 O MANUAL RPN
OUTPUT SELECT : Y
RPN CURSOR : OFF
TEST OUT MENU : ON
CURSOR H POS. : 0
CURSOR V POS. : 0
CURSOR JUMP : CURR
RECORD RPN : EXEC
DELETE RPN : EXEC
FIELD/FRAME : FIELD