background image

– 40 –

SECTION  5

EXPLODED VIEWS

5-1. CHASSIS SECTION

NOTE:

• -XX, -X mean standardized parts, so they may have

some difference from the original one.

• Items marked “*” are not stocked since they are

seldom required for routine service. Some delay
should be anticipated when ordering these items.

• Color Indication of Appearance Parts Example:

KNOB, BALANCE (WHITE) . . . . (RED)

Â

Â

Parts color Cabinets color

• The mechanical parts with no reference number in

the exploded views are not supplied.

• Hardware (# mark) list and accessories and pack-

ing materials are given in the last of this parts list.

The components identified by
mark 

!

 or dotted line with mark

!

 are critical for safety.

Replace only with part number
specified.

Les composants identifiés par une
marque 

!

 sont critiques pour la

sécurité.
Ne les remplacer que par une
piéce portant le numéro spécifié.

Ref. No.

Part No.

Description

Remark

Ref. No.

Part No.

Description

Remark

*

1

X-3376-729-1 COVER ASSY

2

X-3376-728-1 PANEL (1) ASSY, SUB

3

X-3368-104-2 LOCK ASSY

*

4

3-030-927-01 BRACKET (MD)

5

3-922-535-11 SCREW (+BTT)

*

6

A-3294-551-A MAIN BOARD, COMPLETE (CDX-4250)

*

6

A-3294-631-A MAIN BOARD, COMPLETE (CDX-4500)

*

7

3-030-849-01 HEAT SINK (T)

*

8

3-019-565-01 BRACKET (IC)

*

9

3-030-850-01 HEAT SINK (REG)

*

10

3-030-876-01 CHASSIS

11

1-769-786-81 CORD (WITH CONNECTOR) (POWER)

*

12

3-024-285-01 CUSHION (RUBBER)

*

13

3-024-016-11 PAPER (N), SHIELD

F901

1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) 10A

TU01

A-3301-697-A TUNER ASSY

1

11

3

2

10

9

7

6

5

5

4

#1

#1

#1

#2

#2

#2

#2

#1

#1

#1

#3

#3

#10

#2

F901

MG-363X-121

8

TU01

13

12

A

A

B

B

Содержание CDX-4250 - Fm/am Compact Disc Changer System













































Отзывы: