Sony CD Mavica MVC-CD250, Руководство по обслуживанию

Страница: 82 / 125

MVC-CD250/CD400
5-26
16. Auto White Balance 5800K Standard Data Input 2
Adjust the white balance standard data at 5800K.
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Filter Filter C14 for color temperature
correction
Adjustment Page F
Adjustment Address 94 to 97, A0 to A3
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2:
“Auto White Balance 5800K Standard Data Input 2” is
available only once after the power is turned on. Turn the
power off, then on again if the adjustment is retried.
Adjusting method:
Order Page Address Data Procedure
1 Place the C14 filter on the lens.
2
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
3
Perform “Picture Frame set-
ting ”. (Refer to page 5-15)
4 F A0 2A Press PAUSE button.
5 F A1 A0/80 Press PAUSE button. (Note 4)
6 F A2 61/5D Press PAUSE button. (Note 4)
7 F A3 00/C0 Press PAUSE button. (Note 4)
8 6 B6 Note down the data.
9 6 B6 03
10 B 6E
Note down the data.
(MVC-CD250 only)
11 B 6E 80
Press PAUSE button.
(MVC-CD250 only)
12 6 37 0A
13 6 01 A5 Press PAUSE button. (Note 3)
14 6 02
Check the data changes to
“01”.
Note 3:
The adjustment data will be automatically input to page:
F, address: 94 to 97and A0 to A3.
Note 4: MVC-CD250/MVC-CD400
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 37 00
2 6 01 00 Press PAUSE button.
3 6 B6
Set data noted down at step 8,
and press PAUSE button.
4 B 6E
Set data noted down at step 10,
and press PAUSE button.
(MVC-CD250 only)
5
Release the data setting per-
formed at step 2. (Refer to
page 5-16)
6
Remove the C14 filter on the
lens.
RadarW RadarW RadarW
17. Auto White Balance 5800K Standard Data Input 3
Adjust the white balance standard data at 5800K.
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Filter Filter C14 for color temperature
correction
Adjustment Page F
Adjustment Address 98 to 9F, A0 to A3
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2:
“Auto White Balance 5800K Standard Data Input 3” is
available only once after the power is turned on. Turn the
power off, then on again if the adjustment is retried.
Adjusting method:
Order Page Address Data Procedure
1 Place the C14 filter on the lens.
2
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
3
Perform “Picture Frame set-
ting ”. (Refer to page 5-15)
4 F A0 2A Press PAUSE button.
5 F A1 A0/80 Press PAUSE button. (Note 4)
6 F A2 61/5D Press PAUSE button. (Note 4)
7 F A3 00/C0 Press PAUSE button. (Note 4)
8 6 B6 Note down the data.
9 6 B6 03
10 B 6E
Note down the data.
(MVC-CD250 only)
11 B 6E 70
Press PAUSE button.
(MVC-CD250 only)
12 6 37 0C
13 6 01 A5 Press PAUSE button. (Note 3)
14 6 02
Check the data changes to
“01”.
Note 3:
The adjustment data will be automatically input to page:
F, address: 98 to 9F and A0 to A3.
Note 4: MVC-CD250/MVC-CD400
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 37 00
2 6 01 00 Press PAUSE button.
3 6 B6
Set data noted down at step 8,
and press PAUSE button.
4 B 6E
Set data noted down at step 10,
and press PAUSE button.
(MVC-CD250 only)
5 Release the data setting per-
formed at step 2. (Refer to
page 5-14)
6
Remove the C14 filter on the
lens.
RadarW RadarW RadarW RadarW RadarW