Sony CD Mavica MVC-CD250, Руководство по обслуживанию

Страница: 78 / 125

MVC-CD250/CD400
5-22
11. Auto White Balance 3200K Standard Data Input 3
RadarW RadarW RadarW
Adjust the white balance standard data at 3200K.
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Adjustment Page F
Adjustment Address 84 to 87
Note 1:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2: “Auto White Balance 3200K Standard Data Input 3” is
available only once after the power is turned on. Turn the
power off, then on again if the adjustment is retried.
Adjusting method:
Order Page Address Data Procedure
1
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
2
Perform “Picture Frame set-
ting ”. (Refer to page 5-15)
3 6 B6 Note down the data.
4 6 B6 03
5 6 37 06
6 6 01 0B Press PAUSE button. (Note 3)
7 6 02
Check the data changes to
“01”.
Note 3:
The adjustment data will be automatically input to page:
F, address: 84 to 87.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 6 37 00
3 6 B6 00
“Set data noted down at step
3, and press PAUSE button.”
4
Release the data setting per-
formed at step 1. (Refer to
page 5-14)
10. Auto White Balance 3200K Standard Data Input 2
RadarW RadarW RadarW
Adjust the white balance standard data at 3200K.
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Adjustment Page F
Adjustment Address 7C to 7F
Note 1:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2: “Auto White Balance 3200K Standard Data Input 2” is
available only once after the power is turned on. Turn the
power off, then on again if the adjustment is retried.
Adjusting method:
Order Page Address Data Procedure
1
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
2
Perform “Picture Frame set-
ting ”. (Refer to page 5-15)
3 6 B6 Note down the data.
4 6 B6 03
5 6 37 04
6 6 01 0B Press PAUSE button. (Note 3)
7 6 02
Check the data changes to
“01”.
Note 2:
The adjustment data will be automatically input to page:
F, address: 7C to 7F.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 6 37 00
3 6 B6 00
“Set data noted down at step
3, and press PAUSE button.”
4
Release the data setting per-
formed at step 1. (Refer to
page 5-14)