1-3
CCP-1100SF
4
Features
• High speed cassette duplication at 16 times normal speed.
• Side selector to select one-side duplication or both-side duplication.
• Auto-copy function to activate a series of tape operation automatically at
the press of a button.
• Short tape indicator to show that duplication may be uncompleted due to
a short copy tape and that a check is required.
• Control output terminal for connecting an additional audio cassette
duplicator with copy section only.
• Playback volume controls with level meters for each channel of the
original tape.
• Two-reel motor direct drive system per each position.
• End beep when duplication is finished.
• The static suppression brush for preventing electrostatic noise.
• Up to 5 CCP-1400s can be connected to CCP-1100SF.
Table of Contents
Precautions ........................................................................ 3
Features ............................................................................. 4
Location and Function of Controls ................................. 5
Front ................................................................................. 5
Rear .................................................................................. 5
Preparation ........................................................................ 6
Cassette Insertion ............................................................. 6
Connection ....................................................................... 7
Duplication ......................................................................... 8
Maintenance .................................................................... 10
Cleaning the Heads and Tape Path ................................. 10
Demagnetizing Heads .................................................... 10
Cleaning the Cabinet ...................................................... 10
Specifications .................................................................. 11
5
Location and Function of Controls
Front
1
POWER switch and indicator
Turn the switch ON and the indicator lights up. The
SHORT TAPE indicator also lights up. After four
seconds of warming up, the SHORT TAPE indicator
will go off and the unit will be ready to operate.
2
Playback level controls
The knobs A and B control the playback sound level of
the cassette side A and B respectively.
3
Level meters
The meters A and B indicate the playback level of the
cassette side A and B respectively.
4
ORIGINAL cassette compartment
5
COPY cassette compartment
6
SHORT TAPE indicator
Lights when the copy tape reaches the end before the
original tape is completely duplicated. (Refer to
“SHORT TAPE Indicator” on page 9.)
Also lights when there is no tape in the corresponding
cassette compartment. The indicator goes off when any
button but STOP is pressed.
7
SIDE SELECT switch
Selects one side or both sides of the cassette per
duplication run.
A: for one side duplication.
A + B: for both sides duplication.
8
REWIND button
Press to rewind the tape(s). Each tape stops
automatically at the beginning. The tapes in all
connected CCP-1400 duplicators will also be rewound.
Rear
qd
qs
9
STOP button
Press to stop the tape(s). The tapes in all connected
CCP-1400 duplicators will also stop.
0
COPY button and indicator
Press to duplicate the tape. The indicator lights and
playback of the original tape and recording on the copy
tape start immediately. Recording also starts in all
connected CCP-1400 duplicators. When duplication is
finished, both the tapes stop. The indicator goes off
and the end beep sounds.
qa
AUTO COPY button and indicator
Press to rewind and then duplicate the tapes. The
indicator lights and both the tapes are rewound to the
beginning. When both the tapes have been rewound,
the AUTO COPY and COPY indicators light and then
playback of the original tape and recording on the copy
tape start. Recording also starts in the connected CCP-
1400 duplicators. When duplication is finished and
both the tapes come to the end, the COPY indicator
goes off. With the AUTO COPY indicator still lit, the
tapes start to rewind. If the SHORT TAPE indicator
lights, the copy tape is not rewind. When both the
tapes are rewound to the beginning, the AUTO COPY
indicator will go off and the end beep will sound.
Rear
qs
AC IN socket
Connect the supplied AC power cord.
qd
LINE/CONTROL OUTPUT connector (13-pin
DIN)
Supplies the track signal of the original tape and the
driving signal to additional duplicators. Connect to the
LINE/CONTROL INPUT connector of CCP-1400.
3
2
1
4
5
6
7
qa
8
0
9
