Sony CCD-TRV12, Руководство по эксплуатации

Страница: 54 / 72

54
Symptom Cause and/or Corrective Actions
• Reset the date and time. (p. 42)
• START/STOP MODE switch is set to or 5 SEC.
m Set it to . (p. 33)
Picture
Symptom Cause and/or Corrective Actions
• The viewfinder lens is not adjusted.
m Adjust the viewfinder lens. (p. 13)
• The contrast between the subject and background is too high.
The camcorder is not malfunctioning.
m Change locations.
• The video heads may be dirty.
m Clean the heads using the Sony V8-25CLH cleaning cassette.
(p. 48)
• The LCD panel is open.
m Close the LCD panel. (p. 17)
• Incorporated fluorescent tube is worn out.
m Please contact your nearest Sony dealer.
• The camcorder is not malfunctioning.
• The camcorder operates in Demo mode.
m Exit the Demo mode. (p. 68)
Others
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF.
m Set it to ON. (p. 36)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The battery is not inserted with the correct polarity.
m
Insert the battery with the correct polarity. (p. 66)
• The batteries are dead.
m Insert new ones. (p. 66)
• Detach the eyecup and clean the viewfinder lens. (p. 49)
The image on the viewfinder
screen is not clear.
The date or time indicator
disappears.
Recording stops in a few
seconds.
A vertical band appears when
a subject such as lights or a
candle flame is shot against a
dark background.
The picture is “noisy”.
The picture does not appear
on the LCD screen.
Trouble check
Symptom Cause and/or Corrective Actions
• Set the selector to VTR (DC OUT) and disconnect the power
cord. After about one minute, try again. (p.9)
• See the following chart.
The POWER lamp does not
light.
The CHARGE lamp flashes.
AC power adaptor
The picture does not appear
in the viewfinder.
An unknown picture is
displayed.
A vertical band appears when
shooting a very bright subject.
The supplied Remote
Commander does not work .
There is dust in the viewfinder.