26
US
Chapter 3
Setting up the
Keypad
This chapter provides you with
information regarding installation,
hookup and settings for the optional
Keypad.
Installing the Keypad
A Keypad must be installed in a junction box (not
supplied). Follow the procedures below to mount a
Keypad mounting bracket and a Keypad on the wall.
Installing the Keypad
1
Place the Keypad mounting bracket over a junction
box which has already been installed on the wall
with the mounting lips facing out.
2
Attach the Keypad mounting bracket to the
junction box with the supplied screws at the four
points as shown below.
Proceed to the steps in “Zone related cables hookups”
on page 18 before mounting the Keypad.
Note
The Keypad mounting bracket may not fit easily over some
junction boxes. In this case, loosen the screws and move the
Keypad mounting bracket left to right to center on the
junction box.
