23
US
Setting up the Main Unit
You can check to see if the remote code of the source
component have been successfully learned by the Main
Unit.
1
Press SOURCE /– to select the source
component that you want to check.
2
Press MODE repeatedly until “<<CHECK>>“ appears
in the display window, then press ENTER.
“SET COMMAND” appears for a few seconds, then
some of the learned remote codes appear in the
display window.
3
Press the
R
cursor or
r
cursor repeatedly to select
the remote code that you want to check (ex. play,
stop).
4
Press ENTER.
The selected remote command will be performed.
Testing Learned Remote
Code – CHECK Mode
Viewing disc information
– DISC SEARCH
By connecting a Sony DVD Mega Changer to an RS232C
jack, or a Sony CD Mega Changer to CONTROL A1II, you
can view disc information, such as a disc title.
1
Turn off the power.
2
Press and hold MODE and the
T
cursor
simultaneously, and then turn on the power.
“DISC SEARCH” appears in the display window for a
few seconds, then, “DVD MEGA” appears.
3
Press the
R
cursor
or
r
cursor
to select “DVD MEGA”
or “CD MEGA”.
4
Press ENTER.
“SEARCHING NOW…” appears and flashes while the
Main Unit is searching for the disc information.
“COMPLETED!” appears after the information has
been received, and a DVD Mega Changer or a CD
Mega Changer turns off automatically.
“FAILED!” appears when information is not found or
cannot be read.
5
Press ENTER when you have finished.
The display returns to the NORMAL mode.
Customizing the Main Unit
– INSTALLATION Mode
