Sony CA-TX50, Руководство по эксплуатации

Страница: 185 / 194

99
Operating Scene Files
Scene files are stored in the memory of this unit (or of
the camera when using the DXC-D50-series camera).
Among the setting items listed in the table on pages 97
and 98, the settings for those items that have “yes” in
the scene-file column can be stored as a scene file. Up
to 20 scene files can be registered and retrieved as
required. To register or retrieve scene files, use the
Scene File Operation menu.
Registering a scene file
Use the Scene File Operation menu for storing a scene
file, in the following manner:
1
Make the adjustment for the setting items that have
“yes” in the scene-file column in the table on pages
97 and 98, until the values you wish to store are
obtained.
2
Press the SCENE button in the menu operation
block to display the Scene File operation menu on
the LCD.
Store
1 2 3 4 5
Scene Files
Scene 1 : STUDIO1
Scene 2 : DXC-D30 Scene : 2*
DXC_D
Scene 3 : TEST 002
Scene 4 :
Scene 5 :
Page Char Cur
3
Press
[Store]
.
4
Enter a filename (up to eight characters) in the
filename input box.
Moving the cursor: Turn the rightmost knob
(Cur) until the cursor comes to the position
where you wish to enter a character.
Selecting a character: Turn the second knob
(Char) from the left until the character which
you wish to enter appears.
5
Press a scene file select button (1 to 20)
corresponding to the memory cell in which you
wish to store the setting data.
If the scene file button corresponding to the
memory cell in which you wish to store data is not
displayed, press either the
v or V button at the
lower-right position. You can change the scene file
buttons by 5, in the order of
[1]
to
[5]
,
[6]
to
[10]
,
[11]
to
[15]
, and
[16]
to
[20]
. You can also change
the buttons one by one. When the knob at the
leftmost position (Page) is turned clockwise,
larger-numbered buttons are displayed one by one.
When the knob is turned counterclockwise,
smaller-numbered buttons are displayed in turn.
The selected file number is displayed above the
filename input box.
Retrieving a scene file
Use the Scene File operation menu for retrieving a
scene file.
1
Press the SCENE button in the menu operation
block to display the Scene File Operation menu on
the LCD.
2
Press either the v or V button, or turn the knob at
the leftmost position (Page) until the file button
corresponding to the desired file is displayed.
3
Press the button corresponding to the scene file to
be retrieved.
The selected scene file is retrieved, and the settings
of the camera are replaced with the data of the
retrieved file.