Sony CA-TX50, Руководство по эксплуатации

Страница: 39 / 194

Chapter 1 Overview
14
Chapter 1 Overview
qs
OUTPUT/DCC (Color bar output/dynamic
contrast control) switch
Use this switch to select the DCC function or color
bar output.
Select the CAM/ON position in most cases.
CAM/ON: This activates the DCC function. This
prevents color faults when shooting high-intensity
subjects.
CAM/OFF: When the DCC functions are disabled,
you can manually adjust knee values on page P5
<KNEE/WHITE CLIP> of the PAINT menu. (See
page 66).
BARS: This setting displays color bars.
qd
MENU dial
Turn this dial to change menu pages, items, or setting
values, and press it to register.
For details on menu operation, see Chapter 4 “Viewfinder
Screen Indications and Menus” (page 49).
qf POWER switch
This powers the camera on and off. There are two
different ON settings as follows.
ON STBY: This puts the VTR on standby. In this
state, pressing the VTR button on the camera
head, the lens or a camera adaptor starts recording
immediately.
ON SAVE: This puts the VTR in the power-saving
state, with the video head drum stationary. In this
state, it takes a few seconds to start recording after
pressing the VTR button.
Note
The VTR state when this switch is in the ON STBY or
ON SAVE position may depend on the VTR model.
qg
GAIN switch
This selects one of the three gain settings, high,
medium or low. You can choose the gain values
assigned to the H, M and L settings from values from
–3 dB to +36 dB. (See page 62.) The factory default
selections are 18 dB (H), 9 dB (M) and 0 dB (L).
Location and Function of Parts