40
GB
Light Sensor
On
Automatically optimises the picture settings according to the
ambient light in the room.
Off
Turns off the “Light Sensor”.
~
• Do not put anything over the sensor, doing so may affect its function. See page 14
to check the position of the sensor.
Logo Illumination
Lights up and turns off the Sony logo on the front of the TV.
Panel Key
Illumination
Constantly lights up the touch sensors on the front of the TV.
PC Power
Management
Switches the TV to standby mode when the TV receives no signal from the PC
input source for 30 seconds.
Language
Sets the language displayed on the menu screens.
Product Information
Displays product information of the TV.
Factory Settings
Resets all settings to factory settings except for the “Programme Block” setting,
“Favourite Set-up” setting, and programme preset data. After completing this
process, the initial set-up screen is displayed. Completing auto tuning in initial set-
up will reset the settings that are not reset by “Factory Settings”. To retain the
settings, skip the “Auto Tuning”.
~
• Do not turn off the TV or press any buttons during “Factory Settings” (takes
about 30 seconds).
Channel Set-up
1 Digit Direct
When “1 Digit Direct” is set to “On”, you can select a channel using one preset
number button (0 – 9) on the remote.
~
• When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and
above by entering two digits on the remote.
Favourite Set-up
Allows you to set your favourite channels by assigning the desired channel
numbers.
To reset the favourite channels, select “- -”.
Auto Tuning
Tunes in all the available channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Programme Sorting
Changes the order of channels stored in the TV.
1
Press
F
/
f
to select the channel you want to move to a new position, then press
.
2
Press
F
/
f
to select the new position for the channel, then press
.
