5
Start-u
p Guide
2
Fix the TV to the stand using the supplied
screws. The arrow marks
indicate the
location of the screw holes used for securing
the stand.
x
KDL-60EX640
x
KDL-55EX630
2: Connecting an
antenna/cable/
VCR
Connecting an antenna/cable
• Fix the TV to the stand according to the arrow
marks
that guide the screw holes using the
supplied screws.
• This TV is very heavy, so two or more people
should place the TV onto the stand.
• If using an electric screwdriver, set the
tightening torque at approximately 1.5 N·m {15
kgf·cm}.
• Keep the TV in a vertical position while
tightening the screws. Be sure to securely
tighten the supplied screws, otherwise the TV
may fall down.
• Use an appropriate screwdriver to attach the
screws tightly without damaging the screw
head.
• Please ensure the AC power cord is away from
the stand installation location when you attach
below stand.
• Do not touch the inner side of the bottom of the
TV stand to avoid being hurt.
• Connecting cables are not supplied.
Connecting an antenna/cable and VCR
Antenna
cable
Antenna cable
Antenna cable
AV cable
VCR