26
Using BRAVIA Sync with
Control for HDMI
The Control for HDMI function enables the TV to communicate with the connected equipment that is
compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by
connecting Sony equipment that is compatible with Control for HDMI (with HDMI cables), you can control
them together.
Be sure to connect the equipment correctly, and make the necessary settings.
Control for HDMI
• Automatically turns the connected equipment off when you switch the TV to standby mode using the
remote.
• Automatically turns the TV on and switches the input to the connected equipment when the equipment
starts to play.
• If you turn on a connected audio system while the TV is on, the sound output switches from the TV
speaker to the audio system.
• Adjusts the volume (
2
+/–
) or mutes the sound (
%
) of a connected audio system.
• You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote.
Possible operations with BRAVIA Sync buttons, see page 12.
– Refer to the instruction manual of the equipment for available control.
• If “Control for HDMI” of the TV is set to “On”
,
“Control for HDMI” of the connected equipment is also
automatically switched to “On”.
x
To make the Control for HDMI settings
The Control for HDMI settings must be set on both the TV side and connected equipment side. See
“HDMI Set-up” (page 41) for the TV side settings. For settings on the connected equipment, refer to its
operating instructions.
