30
– When connecting with USB Wireless adaptor:
Wireless
– When connecting with both of the cables: Wired
• Set to “Auto”, sets the IP address
automatically. For proxy server is not use.
Viewing the network
status
You can confirm your network status.
1
Press
HOME
, then select “Settings” > “Set-
up” > “Network” > “Network Set-up”.
2
Select “View Network setting and status”.
If You Cannot
Connect to the
Internet
Use the diagnosis to check possible causes for
network connection failures, and settings.
1
Press
HOME
, then select “Settings” > “Set-
up” > “Network” > “Network Set-up”.
2
Select “View Network setting and status”.
3
Select “Check Connection”.
This may take several minutes. You cannot
cancel the diagnosis after selecting “Check
Connection”.
