39
Menu Settings
4K 2SI diamond marks
This function is for displaying a test pattern like the following in
the area at the bottom right of the 4K color bar when 4K 2
sample interleave output. OK is displayed if the connections
for Links 1 to 4 are correct, and OK is not displayed if they are
incorrect. This function can be used to check the connections.
DIAGNOSIS menu
<IP LIVE SYSTEM
MANAGER>
C16
NETWORK
INTERFACE
NMI LAN1
, NMI LAN2
Selects the network interface to configure/display.
CONNECTION
DISABLE,
ENABLE
Sets whether to connect the IP Live System Manager
(LSM) for the selected network interface.
DHCP
OFF,
ON
, (OFF)
Sets whether to connect the LSM using DHCP
information.
(If DHCP on the NETWORKED MEDIA INTERFACE
page is set to OFF, this function is disabled and OFF
is displayed.)
LSM IP
ADDRESS
0.0.0.0
to 255.255.255.255
Sets the IP address of the LSM. The setting is applied
when SET is executed. Disabled when DHCP is set to
ON.
CONNECTION
STATUS
SLOT1
DISCONNECTED, CONNECTING,
CONNECTED
Displays the LSM connection status for the selected
network interface of SLOT1.
SLOT2
DISCONNECTED, CONNECTING,
CONNECTED
Displays the LSM connection status for the selected
network interface of SLOT2.
SLOT3/4
DISCONNECTED, CONNECTING,
CONNECTED
Displays the LSM connection status for the selected
network interface of SLOT3/4.
Page name
Page No.
Item
Set value
Meaning
Correct connections
When Link 1 and Link
2 have been swapped
Page name
Page No.
Item
Set value
Meaning
<OPTICAL LEVEL>
D01
OPTICAL LEVEL
Bar graph display
Bar graph display of optical signal level condition
between the unit and the CCU.
CABLE LENGTH
x.x km
Length of the optical fiber cable between the CCU
and camera head
<BOARD STATUS>
D02
SY
OK, NG
Internal board status
DVP
OK, NG
TX
OK, NG
DPR1
OK, NG
DPR2
OK, NG
NET
OK, NG
