Sony BPU-4500, Руководство по эксплуатации

Страница: 14 / 45

14
Connection and Setup
Connection example
Settings
HD CUTOUT Video System
An HD signal can be extracted from the 4K signal by installing
the optional SZC-2001/2001M/2001W HD CUTOUT Software
in the BPU4500.
The region that is cut out can be controlled using a mouse or
other device connected to the HD CUTOUT Controller.
For details about setup and operation, refer to the
SZC-2001/2001M/2001W User’s Guide.
The cut-out HD signal is output from SLOT1 and a 4K signal
can also be output simultaneously from SLOT2.
HD signals down-converted from the 4K signal can be output
from SLOT3, SLOT4, and the CCU.
Also, a wire frame indicating the cut-out region can be
displayed on the signal from SLOT3, SLOT4.
AUX
DC IN AUDIO IN INTERCOM
REMOTE
LINE MIC
AES/EBU
+48V
OFF
TRACKER
DC OUT
RET CTRL
PUSH PUSH
SLOT4 HD SDI OUT SLOT3 3G/HD SDI OUT
SLOT3/4 NM1
REMOTE
1 2 SLOT2 NM1 1 2 SLOT1 NM1
SDI1 SDI2
CAMERA CCU
1 2
IN OUT
REFERENCE
SLOT1 SDI OUT 1 SDI OUT 2 SDI OUT 3 SDI OUT 4
SLOT2 SDI OUT 1 SDI OUT 2 SDI OUT 3 SDI OUT 4 SDI OUT 5 SDI OUT 6 SDI OUT 7 SDI OUT 8
SDI
OUT 2
SDI OUT
1 2 3 4
SDI
OUT 4 SDI
OUT 6 SDI
OUT 8 REMOTE
CAMERA
3G/HD SDI OUT
BPU
SDI-MONI
CA4000
BPU4500
Optical fiber cable
Switcher
(4K Quad Link)
Sync signal input
Return video signal
Prompter signal, etc.
3G SDI/HD SDI
Monitor
External power supply
HD-SDI Monitor
Remote Control Panel
RCP-1500/1501/1530 Monitor
(4K Quad Link)
For details about assignment of BNC connectors, see “Relationship
between Connection Type and BNC Connector Assignment” (page 20).
HD-SDI Monitor
Sync signal input
Return video signal
Prompter signal, etc.
Network Switch
Device Setting Menu/Page Item Set value
BPU4500 Image format settings CONFIGURATION/
<SYSTEM SETTINGS> SYSTEM
FORMAT RESOLUTION 4096×2160 (4K system)
1920×1080 (HD HFR
system)
FREQUENCY Frame frequency
Video output connector
settings CONFIGURATION/
<OUTPUT FORMAT>
Can also be set using the control panel. SLOT1 to
SLOT4 Video output format of each
slot
CA4000 Prompter output
connector settings MAINTENANCE/<SDI OUT> SDI-MONI OUT HD-PROMPT