13
Connection and Setup
Settings
Extension Mode Connection
The unit can be used to form a video signal extension system
by connecting it to a video camera (F65
1) 2)
or PMW-F55 with
mounted CA4000, HDC4300, or HDC-P43
3)
) using optical
fiber cables.
The system can be synchronized because using the external
genlock function.
Intercom systems and multi-camera operation systems are not
supported.
An external power supply or power supplied from the CCU
connector of an HDCE-200 is also required for the camera,
since power is not supplied from the unit.
HD signals down-converted from 4K signals or generated
normal speed signals from HFR video can be output from the
SLOT3 and SLOT4 outputs.
1) Requires an external power supply when the F65 is used in an
extension connection.
2) Requires the SKC-4065 F65 Adaptor.
3) Requires BPU4500 software version 1.31 or later. Also requires an
HKCU-SM100 CCU Extension Adaptor and single-mode fiber
cable.
Device
Setting
Menu/Page
Item
Set value
BPU4500
Image format settings
CONFIGURATION/<SYSTEM
SETTINGS>
SYSTEM
FORMAT
RESOLUTION
4096×2160
FREQUENCY
Displays value set on
CCU.
Video output connector
settings
CONFIGURATION/<OUTPUT FORMAT>
Can also be set using the control panel.
SLOT1 to
SLOT4
Video output format of
each slot
HDCU2000/
2500
Image format settings
SYSTEM OPERATION/
<MULTI FORMAT>
FREQUENCY HD
Frame frequency
HD-SD
DELAY
Frame (1F)
Video output connector
settings
SYSTEM OPERATION/
<OUTPUT FORMAT>
Can also be set using the control panel.
SLOT1 to
SLOT6
Video output format of
each slot
Transfer rate settings
CCU CONFIGURATION/
<PROMPT/TRUNK>
TRANSMIT
AUTO, HIGH BIT RATE
CA4000
Prompter output
connector settings
MAINTENANCE/<SDI-OUT>
SDI-MONI
OUT
HD-PROMPT
MAINTENANCE/<PROMPTER2 OUT>
OUTPUT
PROMPTER2
