1-3(E)
BKSI-2050/2050P
3.
Attach the model label supplied with the connector
panel in the chassis near the slot to install the board.
n
After the connector panel is inserted into a slot, the
slot label cannot be viewd.
4.
Insert the connector panel to the adaptive slot and fix
the panel with two screws securing the rear blank
panel.
5.
Turn the SIU-80 power off and unplug the appliance
from the outlet, and remove the two screws installing
the connector panel and pull out it.
n
To remove the connector panel, move the right and left
handles on the connector panel front and back alter-
nately until the connection with the mother board is
sufficiently loose, then pull out the connector panel
gently.
2. Installatin of the Board
2-2. Connector Panel Installation
Flow for installation
General information for installation
• The connector panel is inserted into the same slot as the
plug-in board installed in the front of SIU-80.
• The model label supplied with the connector panel is
attached to the chassis to prevent the panel inserting into
the incorrect slot when the connector panel replacement
and others.
w
For safety reason, turn off the power and unplug the
appliance from the outlet before starting the installation.
Installation procedures
1.
Turn the SIU-80 power off and unplug the appliance
from the outlet.
2.
Remove the rear blank pane.(Refer to the Installation
Manual supplied with the SIU-80.)
SIU-80
BVTT 3
×
6
Connector panel
Model label
Start
Slot selection
Connector panel installation
(BKSI-2050/2050P:CN1216/1216P)
Model label attachment
End
SIU-80
Rear blank panel
BVTT 3
·
6
