1-8(E)
BKSI-2050/2050P
4. Location and Function of Switches/LEDs
!\
!\
!\
!\
!\
S602: (Factory use only)
Factory setting : Fixed to all OFF.
!=
!=
!=
!=
!=
S401-1: Free-running adjustment switch for
the parallel-serial conversion
Selected to the “ON” when free-running adjusting for
the parallel-serial conversion. (When selecting to the
“ON”, the SERIAL OUT is not provided.)
Factory setting : OFF
S401-2: (
Factory use only
)
Factory setting : Fixed to OFF.
![
![
![
![
![
S600: Microcomputer RESET switch
n
Under the normal operation, never press this switch.
!]
!]
!]
!]
!]
S601-1: Auto freeze switch
Selected the auto freeze function that is automatically
selected into the FREEZE mode if the input signal is
not received.
Only when selecting into the REF mode {when the
LOCK MODE switch is selected to the “REF”}, the
selection of this switch become possible.
S601-3: Line operation setting switch
Selected the optional line of the vertical blanking into
the Y/C separation mode or B&W mode.
ON
: Y/C separation mode
OFF : B&W mode
S601-5, S601-6, and S601-7:
Line setting switch for SETUP REMOTE
Selected the line that is removed the SETUP within the
vertical blanking period. (BKSI-2050 only.)
S601-7: ON Removed the SETUP of the lines 10 and
later of the odd field.
Removed the SETUP of the lines 273
and later of the even field.
S601-7: OFF Removed the SETUP of the lines with
selected at the switches S601-5 and S601-6.
S601-5
S601-6
Setup Remove Range
ON
ON
Odd field: Lines 22 and later
Even field: Lines 285 and later
ON
OFF
Odd field: Lines 22 and later
Even field: Lines 284 and later
OFF
–
Odd field: Lines 21 and later
Even field: The latter half of lines 283
and later
S601-2, S601-4, and S601-8: (
Factory use only
)
The factory settings are shown below.
(The marks indicate the positions of the switch knobs.)
1
2
3
4
5
6
7
8
ON
