manualshive.com logo in svg

Sony BKS-R1617, Руководство по эксплуатации

Поделиться
Скачать
Sony BKS-R1617 Скачать руководство пользователя страница 9

9

Phantom Function

This control unit has three phantom functions; global
phantom, local phantom, and destination offset local
phantom.  The phantom functions have the following
features.

Global phantom

The global phantom allows you to switch up to 2,800
crosspoints by pressing a single button.  This function
may be used to switch crosspoints defined for a
phantom name with two or more control units.

Note

The global phantom is set on the primary station, so
the route function does not work in combination with
it.  To activate the route display function in
conjunction with the global phantom function, all
crosspoints to be switched must be set on the phantom.

Local phantom

The local phantom allows you to switch multiple
crosspoints by pressing a single button, or to switch
crosspoints independently from destinations controlled
on the unit.  Up to 64 crosspoints can be set for a
phantom name.

Destination offset local phantom

The destination offset local phantom sets the
destination of the local phantom to a substitute
parameter such as “(DST + *),” where “*” is an offset
value of the connector number of the destination.
“DST” is automatically substituted with the connector
number of the destination selected when phantom-
switching.  For example, if the destination is OUT005,
the connector number of the destination is 015, and the
offset value is 2 (* = 2), the destination 017 is
switched.
To execute the destination offset local phantom, first
select and check the destination.

Examples of this Phantom are given below.

Example 1
Assign a source (audio source AUD007 for example)

of a level to multiple sources of another level (video
source IN001 and IN005 for example)

Source name for
each level

Setting of destination

Source LEVEL LEVEL2 offset local phantom
name

1

IN001 IN001 AUD007 IN001: DST+0<IN001-

10000000

IN001: DST+0<AUD007- 01000000

IN005 IN005 AUD007 IN005: DST+0<IN005-

10000000

IN005: DST+0<AUD007- 01000000

Example 2
To set a pair of crosspoints (multiple audio channels,

video key signal for example)

Setting of Destination Offset Phantom

IN001: DST + 0<IN001-10000000

IN001: DST + 1<IN002-10000000

IN003: DST + 0<IN003-10000000

IN003: DST + 1<IN004-10000000

VTR Control

You can assign tape-transport functions (EJECT,

STOP, PLAY, REW, F FWD, REC) to source/
destination select buttons and controls a VTR from the
control panel.

BKS-R1617

BKS-R1621

ASSIGN

DEST

PROT

BKS-R1617

SELECTOR

LOCK

(CHOP)

14 15 16

11 12

13

EJECT

REC

REW PLAY F FWD STOP

BKS-R1618

ASSIGN

DEST

PROT

BKS-R1621

SELECTOR

LOCK

(CHOP)

14 15 16

11 12

13

EJECT

REC

REW PLAY F FWD STOP

Содержание BKS-R1617























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды