1-1 (E)
BKPF-R70
1-1. Installing the Board
This section describes how to install the board into the
PFV-D300. If the board is installed into other PFV, refer to
the manual supplied with the PFV. The board can be
installed in any slot of the PFV-D300.
n
Turn off the power of the PFV-D300 and unplug the power
plug from the outlet before installing or removing the
board.
Main board installation
1.
Loosen the four screws (with stoppers) and remove the
front panel.
2.
Remove the six screws and remove the board retainers.
Fig1-01E
Section 1
Installation
3.
Insert the main board along the board guide rails.
Fig1-02E
PSW 3
x
6
PSW 3
x
6
Board retainers
Board guide rail
Component side
Main board
