1-13 (E)
BKPF-R70
1-10. Setup
4.
Set the control terminal to the same settings as this board.
n
This board’s setting is as follows:
Setting Item
Setting
Speed
9600 bps / 38.4 kbps
Start Bit
1
Data Bits
8
Parity Bit
None
Stop Bit
1
5.
Press x key with pressing Ctrl key from the control terminal. (Ctrl
_
x)
To return to System Status Screen, press Ctrl
_
x key.
When starting the setting (Menu Screen)
SONY ROUTING SYSTEM SETUP MENU
BKPF-R70 V1.00
STATION NUMBER 1
MODIFICATION COMMAND
A: DISPLAY CONTROL AREA
B: SET SOURCE/DEST TYPE
C: SET DESTINATION NAME
D: SET SOURCE NAME
E: SET LEVEL TABLE
F: SET ACTIVE UNIT NUMBER
G: UPDATE BACKUP CONTROLLER
H: SET GLOBAL PHANTOM
J: NAME STYLE (Type
+
Num)
K: RESET TO DEFAULT TABLE
L: SET PHYSICAL ASSIGNMENT
M:SET INHIBIT TABLE
N: SET DESCRIPTION NAME GROUP
O: SET TIE LINES
P: CHANGE PASSWORD
Q: CHANGE CROSSPOINT
R: CALL SECONDARY STATION
MAINTENANCE COMMAND
———————————————
T: SET CLOCK
U: SELECT CONTROL MODE
V: SELECT WARNING DISPLAY (ON)
W:SYSTEM STATUS LOG
X: DISPLAY S-BUS COMMUNICATION
Y: DISPLAY TABLE DATA
Z: SET UNIT DETECTABLE
Ctrl
_
X: QUIT SETUP MENU
For the remainder of the setup procedure and the setting data backup (BZR-10 supplied with BKPF-R70
is used), refer to the installation manual of ROUTING SWITCHER SYSTEM.
