1-4 (E)
BKPF-R70
1-3. Components
The BKPF-R70 is composed of the following items.
.
Main board (CPU-256 board)
(1)
.
Connector panel (CN-1515 board)
(1)
.
Operation Manual
(1)
.
Installation Manual
(1)
.
Slot number label
(1)
.
Data Backup Software (BZR-10)
(1)
1-4. Location and Function of the Connectors
fig1-08E
1
1
1
1
1
REMOTE 1 connectors (BNC type)
These connectors are used for S-BUS control.
The devices of the secondary station can be
connected to the A, B, or C connectors.
For the fast-response communication, connect the
devices as follows.
Connector A:
Routing switchers
Connector B and C: Remote control units
2
2
2
2
2
REMOTE 2 connector (D-sub 9-pin type)
This connector is used for RS-422A control.
The control command input from this connector is
converted to S-BUS (REMOTE 1) in the
BKPF-R70.
3
3
3
3
3
REMOTE 3 connector (D-sub 9-pin type)
This connector is used for RS-232C control.
4
4
4
4
4
MAIN-BACKUP connector (D-sub 25-pin type)
This connector is used to connect between the main
board and backup board.
If connects the backup board to the main board and
installs two boards in a PFV, the PFV
has a dual
controller.
1-3. Components
1-4. Location and Function of the Connectors
MAIN-BACKUP
BKPF-R70
REMOTE 3
RS232C
A
REMOTE 2
C
B
A
REMOTE 1
CONTROLLER
1
2
3
4
