Sony BKP-7311, Руководство по установке

Страница: 9 / 12

1-5 (E)
BKP-7311 IM
16. Tighten the two screws (M4
x
20) on the front panel
to install the front panel.
1-3. Installation of BKP-7311
1-4. System Adjustment
M4 x 20
M4 x 20 Front panel
1-4. System Adjustment
Perform the adjustment of VA-156A board in CCU-700A
(VA-156P board in CCU-700AP) as follows.
Turn on the power of CCU-700A/700AP, and then adjust
the VA-156A board in CCU-700A (VA-156P board in
CCU-700AP) making sure that the signal of camera should
be stable.
Extend VA-156A/156P board with BKP-7900 Extension
Board.
Adjustment Procedure
Adjust the camera H phase as shown below.
Equipment : Oscilloscope (CHOP mode)
To be extended : VA-156A/156P board
Test point : CH1 pin A36/extension board
CH2 pin C18/extension board
Adjustment point : 1 RV1892/VA-156A (VA-156P)
board
Specifications : T = 0.35
±
0.10
µ
s
50 %
50 %
CH-2
T
CH-1