Sony BKP-7311, Руководство по установке

Страница: 6 / 12

1-2 (E)
BKP-7311 IM
Power unit
Screws
(PWH4
x 10)
Screws
(PWH4
x 10)
Front panel
Plug-in
boards
Unlock Unlock
1-3. Installation of BKP-7311
1. Disconnect the power cord from the rear panel of
CCU-700A. Loosen the two screws (M4 x 20) and
remove the front panel.
2. Push and turn the eject levers to unlock and pull out all
the plug-in boards from the unit.
3. Loosen the four screws (PWH4 x 10) fixing the power
unit and remove the power unit while pushing the
power unit forward at the fan in the rear of the unit.
4. Remove the six screws (B3 x 5) and open the rear
panel. Disconnect the flexible card wire from CN3 on
the rear panel.
5. Install the three coaxial cables into the supplied
harness guide.
1-3. Installation of BKP-7311
Flexible card wire
MB-563 board
B3 x 5
B3 x 5
B3 x 5
Rear panel
CN-3
Coaxial cables
Harness guide