background image

11

Inserting/Ejecting the “Memory Stick”

Before using a “Memory Stick Duo”/
“Memory Stick PRO Duo”

Before using a “Memory Stick Micro”

Attach the M2 adaptor to the “Memory Stick Micro” to 
insert into the slot of the unit.

• You cannot record or erase data when the write-protect 

tab on the “Memory Stick” is set to LOCK.

• Image data may be damaged in the following cases:

– If you remove the “Memory Stick,” or turn the power 

off when the access lamp is lit or flashing

– If you use a “Memory Stick” near static electricity or 

a magnetic field

• When writing in the memory area, do not put strong 

pressure on the pen.

• We recommend backing up important data.
• Do not attach anything other than the supplied label to 

the “Memory Stick” labeling position. 

• Attach the label so that it does not stick out beyond the 

labeling position.

• Carry and store the “Memory Stick” in its case.
• Do not touch the connector of the “Memory Stick” with 

anything, including your finger or metallic objects.

• Do not strike, bend, or drop the “Memory Stick.”
• Do not disassemble or modify the “Memory Stick.”
• Do not allow the “Memory Stick” to get wet.
• Do not use or store the “Memory Stick” in a location that 

is:
– Extremely hot, such as in a car parked in the sun
– Under direct sunlight
– Very humid or subject to corrosive substances

• Do not insert multiple “Memory Stick” cards at the same 

time.  This may cause damage to the product.

• When you use “Memory Stick Duo”/“Memory Stick 

PRO Duo” with this product, be sure to insert it in the 
right direction.  Inserting it in the wrong direction may 
cause damages to the product.

• “Memory Stick Duo”/“Memory Stick PRO Duo”/ 

“Memory Stick Micro” and M2 adaptor should be kept 
away from small children to prevent them from 
accidentally swallowing it.

• If the “Memory Stick Micro” attached to the M2 adaptor 

is attached to the Memory Stick Duo adaptor and inserted 
in the slot, the “Memory Stick Micro” may not function.

• Use the machine and application corresponding to the 

“Memory Stick” for initialization of the “Memory 
Stick”.  When Windows Explorer is used for 
initialization, a format error is caused and the “Memory 
Stick” is not usable for the monitor.

• When the data in the folder for the application software 

is copied or edited with the function of Windows, the 
data may not be reproduced.

Windows is a registered trademark of Microsoft 
Corporation in the United States and/or other countries.

Notes

Terminal

Write-protect tab
Use an object with 
a pointed end to 
set the switch.

Rear

Front

“Memory Stick”, “Memory Stick PRO”, “Memory Stick 
Duo”, “Memory Stick PRO Duo”, 

“Memory Stick 

Micro”

, “M2” and 

 are trademarks or registered 

trademarks of Sony Corporation.

It is against the copyright law to use any audio or picture 
you recorded without prior consent of the copyright 
holder. Accordingly, “Memory Stick” with content 
protected image or data can be only used within the law.

 

Содержание BKM-16R


















Отзывы: