12
Step 2: Easy Setup
1
Insert two R6 (size AA) batteries by
matching the
3
and
#
ends on the
batteries to the markings inside the
battery compartment.
2
Plug the player into the mains.
3
Press
[
/
1
to turn on the player.
4
Turn on the TV, then switch the input
selector on your TV so that the signal
from the player appears on your TV
screen.
5
Perform [Easy Setup].
Follow the on-screen instructions to
make the basic settings using
<
/
M
/
m
/
,
and ENTER on the remote.
Connecting to the
Network
Use a LAN cable to connect to the LAN (100)
terminal on the player.
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
To set the network settings
Select [Network Settings], [Internet
Settings], then [Wired Setup] (page 27), and
follow the on-screen instructions to complete
the setup.
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
to mains
ENTER
<
/
M
/
m
/
,
Wired Setup
ADSL modem/
Cable modem
Broadband
router
LAN cable
(not supplied)
Internet
