12
Before requesting service
,
In some cases, the system may not recognize the device if an external USB hub
is used and more than the allotted number of devices are connected. Try
removing unused devices.
When connecting a USB device, the message "An unknown USB device
has been connected." is displayed.
,
The connected device may not be compatible with the system or software
application.
,
The device may be compatible with specific software only. Use software that is
compatible with the device.
,
There may be too many USB hubs connected. Try removing a USB hub.
The wireless controller does not function.
,
When using the controller wirelessly, if the controller and the system are too far
apart, you will not be able to operate the system effectively.
,
When using the wireless controller, you must pair it with the system and assign
a controller number. With the system turned on (power indicator on the system
front is lit solid green), connect the system and the controller using the USB
cable, and then press the PS button on the controller.
,
The controller number may have been cleared. Press the PS button on the
controller to reassign the number.
,
Check the charge level of the wireless controller battery. When the controller is
used in wireless mode, it will not function if the battery does not have any charge
left. Charge the battery by connecting the controller to the system with the USB
cable.
,
The wireless controller that is supplied with this system is not equipped with a
vibration function and will not vibrate even when using software that support the
vibration function.
,
Reset the wireless controller by pushing the reset button on the controller rear
with a sharp-tipped object such as a pen.
The response to button operations is slow.
,
The response speed may be slow on an LCD display or PC display. This is not a
malfunction.
The battery does not charge or does not fully recharge.
,
The battery can only be charged when the system is turned on (power indicator
on the system front is lit solid green).
,
See "Wireless controller battery" (
The battery charge does not last long.
,
The battery may be wearing out. Battery duration will gradually decrease with
repeated usage and age. See "Wireless controller battery" (
page 20).
Even when the wireless controller is not being used, it loses its charge
over time.
,
The controller's battery slowly loses its charge even when the controller is not in
use. It is recommended that you charge the controller frequently.
The system makes noise.
,
Because some discs read at higher speeds, disc noise may be louder than normal.
,
When using the system in a location where heat can build up, such as an enclosed
AV cabinet, the internal fan will rotate rapidly to reduce the system’s
temperature and this may generate increased noise. Move the system to a location
with good ventilation.
Wireless controller
Other issues
Reset button
