152
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
If you load other text input software, select it and adjust its
settings here.
User greeting
Your P800 can show a user greeting on the standby screen when
you turn it on. Use this dialogue to turn this function on or off.
You can define your own user greeting text (up to 32
characters).
WIM PIN settings
WIM (WAP Identity Module) is used for performing security
functions, especially to store and process information needed for
user identification and authentication. It is a tamper-resistant
store for private keys, certificates and other items that may
require a PIN for access or modification.
The
WIM management
dialogue consists of PIN choice list and a
WIM items list.
You can select a PIN from the PIN choice list. The WIM items
list changes content dynamically, displaying only the keys that
are protected by the selected PIN and also have an associated
certificate. Other keys that are protected by the selected PIN but
do not have an associated certificate are not shown in the WIM
item list. This is the case when WIM PIN (PIN-G) is selected.
Note
The PIN-G applies to the whole WIM and any items that
do not have a different PIN, that is, no specific items on the WIM
are linked to PIN-G.
You can change status of a PIN:
•
Enable PIN
A PIN code that is enabled is requested for
authorisation of an operation. To proceed with the operation
you must enter the PIN code.
•
Disable PIN
A PIN code that is disabled is not requested to
authorize an operation to proceed.
To change the PIN code:
1. Select the PIN you want to change from the choice list.
2. Select
Change PIN
.
If a PIN code has been blocked, you must unblock it before it
can be used again. Select the PIN and select
Change PIN
.
T
HE
C
ONNECTIONS
TAB
The connections tab contains settings related to how your P800
communicates with other devices.